LUXURY AQUATIC

Coating for pools with microcement

Luxury Aquatic is the complete recommended system for coating with microcement pools or any surface that contains permanent water.

  • Luxury Aquatic Base – Microcement of preparation for coating of swimming pools
  • Luxury Aquatic Mediu – Microcement finishes for pools slightly textured with anti-slip properties
  • Luxury Aquatic Fino – Finishing microcement for pools smooth and smooth finish
  • Aquatic Protect – Sealant primer for swimming pools that creates a protective film

Luxury Aquatic Base

LUXURY AQUATIC microcement Base is a two-component powder. Designed for the preparation of the surface in two hands of the coating of swimming pools. LUXURY AQUATIC is not a mortar for waterproofing by itself. It must be applied on shotcrete or gunite, on a support in good conditions, we advise against applying it on the tile.

Instructions:
Give a primer resin LUXURY RESIN to the support by roller without leaving dry before applying the first coat of LUXURY AQUATIC BASE. 
Hands of preparation: Apply the first coat of preparation microcement (without pigment) on the surface previously primed with LUXURY RESIN, let dry 24 hours (drying time variable according to weather conditions). Apply the second coat of microcement of preparation (with pigment) and allow to dry the same time as the first.

Performance
LUXURY AQUATIC BASE (2 hands) → 3,00 kg / m2

Mortar mix:
10kg of LUXURY AQUATIC BASE → 2.50 liters of resin LUXURY RESIN

The lifetime of the product: 1 hour at about 20ºC. We recommend making kneaded according to the experience of the applicator.

Luxury Aquatic Mediu

LUXURY AQUATIC Medium is a microcement of two components in powder form. Designed to finish the coating of pools leaving a slightly textured finish with anti-slip properties. 
LUXURY AQUATIC is not a mortar for waterproofing by itself. It must be applied on shotcrete or gunite, on a support in good conditions, we advise against applying it on a tile.

How to use:
Prepare the surface with LUXURY AQUATIC BASE. 
Finishing hand: 
Apply two micro-cement finishing hands with the technique “without letting dry” (applying the second hand as soon as the first one stops having “tac“, when it stops sticking to the fingers when touching it) and let it dry 24 hours.

The performance
LUXURY AQUATIC MEDIU (2 hands) → 1.80 kg / m2

Mortar mix:
10kg of LUXURY AQUATIC MEDIU → 3.00 liters of resin LUXURY RESIN

The lifetime of the product: 1 hour at about 20ºC. We recommend making kneaded according to the experience of the applicator.

Luxury Aquatic Fine

LUXURY AQUATIC FINE is a two-component powder microcementDesigned for the completion of the pool coating leaving a smooth and smooth finish. 
LUXURY AQUATIC is not a mortar for waterproofing by itself. It must be applied on shotcrete or gunite, on a support in good conditions, we advise against applying it on a tile.

How to use:
Prepare the surface with LUXURY AQUATIC BASE. 
Finishing hand:
Apply two micro-cement finishing hands with the technique “without letting dry” (applying the second hand as soon as the first one stops having “tac” when it stops sticking to the fingers when touching it) and let it dry 24 hours.

Performance
LUXURY AQUATIC FINE (2 hands) → 1,00 kg / m2

Mortar mix:
10kg of LUXURY AQUATIC FINO → 4.00 liters of resin LUXURY RESIN

The lifetime of the product: 1 hour at about 20ºC. We recommend making kneaded according to the experience of the applicator.

Aquatic Protect

Aquatic Protect is a Sealer  for swimming pools that creates a protective film and consolidates microcement coatings for swimming pools.

How to use:
Apply two coats of Aquatic Protect with roller covering the entire surface, leaving 4 hours to dry between hands. Allow drying 5 days before proceeding to fill the pool.

Performance
AQUATIC -PROTECT (2 hands) → 0.12 l / m2